Toggle navigation

#doyouevenfuckingvapebruh49 POSTS

Post Content
Which Rig mech to use today?

◽Current Setup
◾ Mod - Rig V3 / Outlaw 20700 - @therigmod
◾RDA - Goon - @528_custom
◾RDA - Dead Rabbit - @officialhellvape
◾RDA - Apocalypse V2 - @armageddon_mfg
Dripping the original and the best juice by @themilkmaneliquid with the new Apocalypse V2 RDA.

◽Current Setup
◾ Mod - Cotton Candy V3- @therigmod
◾RDA - Apocalypse V2 - @armageddon_mfg
◾Cotton - @cottonbacon
◾Juice - The Milkman - @themilkmaneliquid
Picked up my 6 packs of @odbwraps today so that meant an hour of re-wrapping 20 batteries. These are the Polar wraps which are running on my 30Q's. Honestly the best wraps going on the market, upgrade your batteries and remember battery safety is VITAL. ▪
◽Current Setup
◾ Mod - Charon 218 - @smoant_official
◾RDTA - Limitless Gold - @limitlessmodco
◾Cotton - @cottonbacon
◾Juice - Harambae - @12monkeysvapor
◾Batteries - Samsung 25R's w/ @odbwraps
Perhaps the most vibrant colour shot I've got 😍 SS316L 22/36AWG flat clapton with 7 wraps at 4.00mm ID. Patient pulsing at 65W.

◽Current Setup
◾ Mod - Charon 218 - @smoant_official
◾RDA - Deathtrap 30mm - @deathwishmodz
◾Cotton - @cottonbacon
◾Juice - Rush Rush Yayo - @cheapthrillsjuiceco
User Image smokeandmirrorvape Posted: Jan 18, 2018 3:33 AM (UTC)

deathwishmodz
38
3 Normal
I'm a real sucker for polished mods and I can't bare to watch the metal tarnish.. I do sometimes really love the full dulled patina aesthetic but it's the in between that bothers me. So four creams and five microfiber cloths later and my Barebones is looking tip top. Made sure to get a toothbrush for the patina in that deep engraving 😁 Honestly cannot praise this mech from @deathwishmodz highly enough - by far my hardest hitter.

◽Current Setup
◾ Mod - Barebones Mech - @deathwishmodz
◾RDA - Unholy V2 - @deathwishmodz
◾Cotton - @cottonbacon
◾Juice - Avid Shakes - @avidlyfeinc
Trying to find that perfect vape on my resin Wasp Nano RDA from @oumierofficial . Managed to very nicely fit in an eight wrap 3.0mm ID flattened SS316L 22/36 Clapton in the deck which reads at 0.21Ω for a single coil! A nice warm saturated vape at 85W on the Charon 218 from @smoant_official with some 25R's in @odbwraps polar wraps. Looking and feeling fresh AF with this setup not gonna lie. Tried squonking it with a parallel Ni80 24AWG coil but didn't have the heat I'm used to on my Pulse so changed out the pin for the 510 to try with some beefier coils. 💨

◽Current Setup
◾ Mod - Charon 218 VW - @smoant_official
◾RDA - Resin Wasp Nano - @oumierofficial
◾Cotton - @cottonbacon
◾Juice - Avid A.D. - @avidlyfeinc
◾Batteries - Samsung 25R's w/ @odbwraps
NEW MOD ALERT! ⚠️ I splashed out and I am like a child on Christmas morning! A phone call on Wednesday evening to @theaceofvapez to see when the Brass Descendant would be back in stock, a follow up phone call Thursday morning and in my hands for Friday. The build quality and finesse is superb, leaps and bounds above my other Rigs and is serious completion for my go to mech mod with the Barebones. Made sure to get the Outlaw tube as well for future upgrade to the 20700. Big thanks to The guys at Ace of Vapes for the super quick order arrangement and to @rw_vaper for the impartial advice!
Bought both The Butcher and The Priest challenge caps from @officialhellvape on the Dead Rabbit RDA. Looks absolutely crisp and really impressive on top of my new new copper Barebones mod and on my new brass Descendant mech. Airflow seems significantly improved but I have to admit I prefer the airflow home on the AFC on the priest.
User Image smokeandmirrorvape Posted: Jan 23, 2018 2:01 AM (UTC)

34
3 Normal
New regulated for out of the house when I can't be bothered with mech life 😂 I'm pretty much exclusively a mech mod guy now but I had this offered to me for £15 and for that price it's a nifty little regulated. Build quality isn't the best and had some battery issues with the contacts but perserved and gave the contacts a good old clean and it's working just fine.

◽Current Setup
◾ Mod - Arms Race V1 - @limitlessmodco
◾RDA - Limitless RDA - @limitlessmodco
◾Cotton - @cottonbacon
◾Juice - I ❤ Popcorn - @vapemadhatter
FINALLY! Been waiting for what feels like forever for @12monkeysvapor to release short fill bottles and they finally have 😭😍 Such a blessing as I only vape 0mg so this is exactly what I needed. Big shout out to @ukecigstore for getting these in and dispatching so quickly - I've needed more Harambae for a while now and I can't wait to try Hakuna on it's own and with some Matata! 🍏🍇🍒
Buffed up the Descendant for the Butcher Challenger Cap on the Dead Rabbit RDA. Swapped out the contacts and springs in most of my Rigs with silver springs and silver contacts - much better!

◽Current Setup
◾ Mod - Descendant Rig - @therigmod
◾RDA - Dead Rabbit - @officialhellvape
◾Cotton - @cottonbacon
◾Juice - Avid A.D. - @avidlyfeinc
Outlaws never die, we just blow fat clouds. 💨
New brass knurled driptip on my Druga is🔥!

◽Current Setup
◾ Mod - Outlaw Rig - @therigmod
◾RDA - Brass Druga - @Augvapeofficial
◾Cotton - @cottonbacon
◾Juice - Harambae - @12monkeysvapor
New Rig V3 from @therigmod! Patiently waited for this and was pleasantly surprised to find out this V3 is made of copper and not aluminium- feels so much better in the hand! Rocking the US1 RDA from @trinityglasstanks.

◽Current Setup
◾ Mod - Cotton Candy Skulls V3 - @therigmod
◾RDA - U.S.1 RDA - @trinityglasstanks
◾Cotton - @cottonbacon
◾Juice - Avid A.D. - @avidlyfeinc
Bringing out the copper Barebones and dripping that fruity juice that is I ❤ Candy Rainbow. Mad flavour on this flat Ni80 build, 3.5mm ID with 6 wraps.

◽Current Setup
◾ Mod - Barebones - @deathwishmodz
◾RDA - Unholy V2 @deathwishmodz
◾Cotton - @cottonbacon
◾Juice - I ❤ Candy Rainbow @vapemadhatter

#deathwishmodz #vapemadhatter #unholyv2 #deathwishfam
User Image smokeandmirrorvape Posted: Jan 25, 2018 1:21 AM (UTC)

26
1 Normal
Switching things up with the mech mods, grabbed one of the last aluminium Limitless Mech tubes in the UK. It's super light compared to my other tubes, still hits hard. Brand new Dead Rabbit RDA on top with my go to dual parallel Ni80 24AWG on 3mm ID with 6 wraps kicking out the clouds! 💨 - Limitless Mech Mod with Cobra Sleeve, Dead Rabbit RDA.
#Vaping #Clouds #vapefamily #vapestars #vapeshop #UKVaping #vapelyfe #vapenation #vapes #vaper #vapefriends #vapefam #vapeon #UKVaper #UKVapeFam #vapedaily #vapelove #vapeaddict #vapefamily #vapeallday #vapeshit #customcoils #coilbuilds #rda #colouredcoils #colourshot #coilcolors #doyouevenfuckingvapebruh  #everydayisastruggletonotkillmyselfsoivapetotakeawaythepainlol #limitlessmechmod #deadrabbit
One of my new mech mods that I've grabbed in the past couple of weeks. Behold the Barebones mod and Unholy V2 RDA from @deathwishmodz. Innovative deck on the RDA uses ball bearings to secure leads ensuring a firm connection every time. Hybrid performance with my 20700's and HB6 18650's make this a hard hitter. Grabbed this beauty of a mod from @evovapinguk and service was flawless, ordered Wednesday and here on Thursday. Who says the afterlife had to be boring? 💀☠ #Vaping #Clouds #vapefamily #vapestars #vapeshop #UKVaping #vapelyfe #vapenation #vapes #vaper #vapefriends #vapefam #vapeon #UKVaper #UKVapeFam #vapedaily #vapelove #vapeaddict #vapefamily #vapeallday #vapeshit #customcoils #coilbuilds #rda #colouredcoils #colourshot #coilcolors #doyouevenfuckingvapebruh  #everydayisastruggletonotkillmyselfsoivapetotakeawaythepainlol #deathwishmodz #barebonesmechmod
Power to the people! Got my tried and trusted OBS Engine up and running again after a couple of months after being shelved in favour of exclusively dripping on my mech mods. Parallel 24AWG Ni80 build in here pumping out solid clouds at 85W. 💨

#Vaping #Clouds #vapefamily #vapestars #vapeshop #UKVaping #vapelyfe #vapenation #vapes #vaper #vapefriends #vapefam #vapeon #UKVaper #UKVapeFam #vapedaily #vapelove #vapeaddict #vapefamily #vapeallday #vapeshit #customcoils #coilbuilds #rda #colouredcoils #colourshot #coilcolors #doyouevenfuckingvapebruh  #everydayisastruggletonotkillmyselfsoivapetotakeawaythepainlol #obsengine