1,314 Posts

codiak55 Lil h2 surgery before the big meats some on!!! #newsprings #4x4 #HUMMER #hummerup #h2 #ninjamechanix #militarytires #merica 53min
  •   a7xmustang Nice I did mine a year agaon did you get OEM mine had air suspension before 48min
  •   codiak55 @a7xmustang only brand I could find was arnott. Cost 160 shipped 35min
  •   a7xmustang Damn there a seller last year new OEM pair $115 shipped 34min

» LOG IN to write comment.

Hudson Christopher
chrisallen09 Just got here at church #newsprings #godisgood. 1d

» LOG IN to write comment.

vanslatter Thank you, @jdktchkov !!!!! #newsprings !!! #e30deirdre 4d

» LOG IN to write comment.

Normal Larry White
lcwhite1 Congrats to my buddy Chris Woods on his achievement #golfbuddy #Newsprings. 4d

» LOG IN to write comment.

jarrod_jeffery Time for a makeover for the ol jeep #newsprings #newshocks #paint #everythingunderthe... #frontend 5d

» LOG IN to write comment.

» LOG IN to write comment.

lilheavy864 Christmas thing. Enjoying the holidays wit the loves ones. #churchflow #newsprings #stayblessed #latepost #westayfly 1w

» LOG IN to write comment.

Mayfair Marissa Christin
__rareakasion Lets start this Sunday off right #Newsprings 1w

» LOG IN to write comment.

» LOG IN to write comment.

purepilatesclassicalstudio It's getting serious up in here. Don't know if I should be trusted with this, but here goes....
#notacarpenter #patienceisavirtue #centerlinechair #selfyconscious #cheesyselfies #newsprings
2w

» LOG IN to write comment.

Valencia Jeremy Baxter
jeremy_gs430 Rear struts are a bit more difficult than the front. #newsprings #lowlife 3w

» LOG IN to write comment.

price_zachary Got that church squad #NewSprings #SpartanburgCampus 3w

» LOG IN to write comment.

abrahamsameer Can you say low life? #60mm #lowlife #newsprings 4w

» LOG IN to write comment.

» LOG IN to write comment.

Normal scallywagsandprincesses
scallywagsandprincesses #newsprings #heatpressvinyl #ordertoday #customorder can make anything custom. Message me with anyquestuons #scallywagsandprincesses 1mon

» LOG IN to write comment.

1mon slashbash1
Normal Sean Turner (seanycool)
slashbash1 Some bling on the TT!! Scte firm springs, still might not be stiff enough. Figuring out shocks is a pain on this thing! I might cheat and take it to the lhs for some setup help. Follow da crew >> #customrctrophytruck <<
#baja #traxxas #trophytruck #trailingarms #solidaxle #solidaxleslash #longtravel #losi #axial #rc4wd #rctrophytruck #4link #proline #prerunner #desert #deserttruck #carbonfiber #aluminum #rpmrcproducts #gold #newsprings #steezy #sweg #sweg2damax
1mon
  •   robsbenson_productions Your custum chassis are AWESOME man! Right now I subscribed to your youtube channel! Your videos are amazing buddy! It would be cool if you check out mine too and subscribe as well Youtube: Robs Benson 1mon
  •   jrube43 How much did you spend building it? 1mon
  •   slashbash1 @robsbenson_productions Thanks so much man that means a lot! Haha trying to get the channel going a bit more, might have an update soon. I'll check out your channel for sure! Love the stuff you do 1mon
  •   slashbash1 @jrube43 Oh I don't know man, a lot haha several hundred at least. Almost spent another hundred at the lhs the other day. These things are moneypits!!! 1mon
  •   jrube43 I wanna make one. Any advice? 1mon
  •   slashbash1 @jrube43 I'd say make sure to save up money for a bit and go with some solid stuff. Don't get things that will sorta work, or be weak. You want this thing to perform well, so you can't skip ANY corners. Also do a lot of modeling with the actual parts you plan to use on the real truck. A lot. Measure thrice, cut once. I learned that the hard way. It's such a pain to see something that's crooked and is too late to fix, so be very critical and cautious with every measurement you take, it'll be so worth it. Look at @cyconxc 's truck for instance, perfect example of weeks and weeks of planning. 1mon
  •   jrube43 Ya @cyconxc tt is amazing and I was thinking about using plexiglass as the chassis because I have now way to cut metal. The best I got for that is a Dremel . Would that work or would It be to weak 1mon
  •   slashbash1 @jrube43 Um idk probably if you got a good blade for it, but it might be a bit slow going lol. But you can find a jigsaw or angle grinder pretty cheap usually. And I'm not sure about plexiglass, it might not be the best stuff to work with for one of these. Ask cycon though, he might have better input on material. IMO, aluminum would probably be the best stuff to work with, light and strong and easy to cut through. 1mon

» LOG IN to write comment.

» LOG IN to write comment.