2,886 Posts

13h johisey
Unknown Joe Hisey
johisey 45 min in and I'm almost done removing material! I will fix this blade. #bladehq #qse7 #quartermaster #knives #lansky 13h
  •   wenkrush What happened? 13h
  •   johisey @wenkrush nothing new, the blade edge wasn't ground all the way to the end. 13h
  •   wenkrush Oh yeah. I think you mentioned that when you first showed it to me. 13h
  •   bladehq @johisey You could have contacted our customer service and they would have taken taken care of you! -Darci 12h
  •   johisey @bladehq I have no doubt you would have, you guys have great customer service! I don't blame you guys for the flaw in the blade at all, I just thought itd be more fun to go at it myself. 12h

» LOG IN to write comment.

Normal Michał

» LOG IN to write comment.

» LOG IN to write comment.

revhiker A buddy of mine scored this #benchmadetriage for $60! In desperate need of a sharpening, bushing cleaning and polish, and fixing a bent clip, he gave it to me for a serious tune up. Look for a full #rehab video on this #triage in the coming week on my YouTube channel! #knife #knifenut #blade #lansky #strop #EDC #everydaycarry 2d

» LOG IN to write comment.

» LOG IN to write comment.

blue_sky_noise666 Was tired of the paint smearing off so I stripped it naked, sanded it, and put a nice dark patina using boiled apple cider vinegar. I got it so sharp hair jumps off my arm :)
#fixedblade#sharp#sharpedge#sidekick#kabar#beckerknives#beckerknifeandtools#bk7#1095#lansky#sharpener#patina#strop#bladepatina#bladejunkie##bladeaddict#knifeaddict#knife#knifecommunity#knifeporn
2d
  •   spillfuzz You need to teach me how to do that patina... I have a bayonet that needs either that or to be re parkerized 2d
  •   blue_sky_noise666 @spillfuzz The blade needs to be completely clean of dirt and finger prints and oil, just a little will fuck it up and the patina won't set. All I did was boil some apple cider vinegar, enough so the whole blade is submerged. Added a spoon full of white vinegar. Put the blade in for about two hours (check it for bubbles ever 10/20 mins bubbles are bad if you let them stay) take it out and pour water on it. If it's in even, sand it with really fine sandpaper, like 400 grit or more. If you want it darker just dry it off and put it back in warm apple vinegar. It was my first time so I'm sorry if it's not very informative xD oh and the blades Coating needs to be stripped before 2d
  •   spillfuzz So almost boiling for two hours? DM me, if im gonna do this I wanna be 100% sure XD 1d

» LOG IN to write comment.

viper_tactical_solutions They are all mirror sharp now... Time to go to sleep. After hours of paracord work, sharpening, cutting myself on accident, kydex molding, and burning myself on accident, I'm ready to call it a day... #knives #zerotolerance #kershaw #lansky #carbonfiber #blades #sharp #kydex #paracord 2d

» LOG IN to write comment.

» LOG IN to write comment.

  •   wjtaylor72 1000 is the finest that I have found also. Agree with you I do the same 1000 and the lansky leather strop makes a nice mirror edge. Especially on D2 steel @gear.guys.knives 3d
  •   jerseydevil1949 I can't do anything more then touch ups and re-sharpening a blade. The do have diomond sticks for sharpmaker that you could re- profile a blade with but I have almost full set of rods for Lansky, I'll have to look into the others you mentioned. I don't have any diomond ones yet. Back to watching Lansky videos. It's all a learning process but I've got nothing but time right now, just a bit short in the cash department . Thanks. They one above the 100, blue one, sapphire something and I've got leather stops they make..just need a good stroke and proper setup..but that's standard on all, none do the work for you. There a place here, Phoenix Knife House that holds classes in wet stone sharpening , $85 and they give you a Japanese utility knife to use and keep.. But you need to switch up and buy a set of wet stones or its just a waste ! 3d
  •   wjtaylor72 Yeah I wish I was better at free sharpening also. But like you say alot Benjamins for good Japanese stones. I think you may be right with the lansky system you are much more consistent with your angles. That might be the reason I get much better results. @jerseydevil1949 3d
  •   patches2790 @jerseydevil1949 look at norton wetstones. I have a 1000/4000 grit stone from them and love it. they go all the way to 8000 grit 3d
  •   patches2790 Whoops that was ment for @gear.guys.knives 3d
  •   gear.guys.knives I've looked into wet stones. How much do they usually run for? 3d
  •   patches2790 I got mine for $60 @gear.guys.knives 3d
  •   gear.guys.knives Nice. That sounds good. Il look into them further 3d

» LOG IN to write comment.

3d ssc403
Inkwell shane camarillo

» LOG IN to write comment.

viper_tactical_solutions Hair shaving sharp with the Edge Pro Apex *cough, cough* I mean lansky Diamond Deluxe Sharpening Kit... What? Yup... Hair shaving sharp for $48! #lansky #knives #shave #razor #sharp #diamond #deluxe #kershaw #skyline #damascus #alabama 3d

» LOG IN to write comment.

shocktroop81 Just got a Lansky sharpening system and must say "I like it!" #mirroredge #knives #knifeporn #lansky #razorsharp #firsttry 4d

» LOG IN to write comment.

Normal lansky sharpeners
lanskysharpeners Introduced this week at SHOT Show: The Madrock World Legal! #knives #lansky 5d

» LOG IN to write comment.