weldporn TAG A MATE WHO GETS DOWN LIKE @rummery
#weldporn
#welding
18h

» LOG IN to write comment.

» LOG IN to write comment.

weldporn Josh from @streetwerkz is the man behind the @3mspeedglas paint job is giving away $500 bucks in shop credit!! For more details head over to his page!! Don't miss out on a chance to get your welding hood custom painted by one of the best 19h

» LOG IN to write comment.

» LOG IN to write comment.

weldporn Support those who support you
#weldpornArmy
1d

» LOG IN to write comment.

weldporn @_1987gata_ coming in hot!!!!
#weldporn
#welding
1d

» LOG IN to write comment.

weldporn So sexy!! Love me some purge welding. If you're building exhausts and they don't look like this on the inside time to step it up guys @juntunenr
#weldporn
#welding
2d

» LOG IN to write comment.

» LOG IN to write comment.

weldporn I'm pretty sure in @rmfl86 weld procedure it calls for BADASS WELD.
#weldporn
#welding
2d

» LOG IN to write comment.

weldporn Insert jackie chan mind blown pic...
@joeloft123
#weldporn
#welding
#madallyskills
2d

» LOG IN to write comment.

weldporn Here's the heart of @the_fabricator lambo exhaust build I featured a couple days ago, where would you start on a job like this? Well Louie gave me a brief rundown on this..
- Theres NO space to build something really worthwhile in the back of these. So I went ahead and took out my thinking cap, dusted it off and put it on... The 3" tube actually goes straight through the muffler to save space. I added another 2" to the standard lambo muffler that I make to gain a little more Volume seeing as though I lost some by running the 3" tube through it.
There's Capristo valves that are vacuum actuated just before the 2.5" tubes, down below on the 3" just off the cat pipes. When the valves close The 2.5" utilizes the mufflers. When they open it goes beast mode 3" straight pipe. I have double stacked X pipes which I haven't ever seen done before and for obvious reason... All hand made. No jigs and barely even a measuring tape on a lot of it. Usually I measure main tubes and eyeball the rest. Didn't weld it down to a table to hold it in place. Just did the welding in sequences that it would wrap one way then back to where i wanted it when I did opposing sides and such. If that makes sense. Some stuff moved out a good 1/2" but ended up back where I wanted it. It's really just knowing the metal and how it works with your weld style. - Louie AKA @the_fabricator
The results speak for themselves I think.
#weldporn
3d

» LOG IN to write comment.

» LOG IN to write comment.

weldporn Was it mig Monday? Must of missed it...
@chris_mazzulla
#weldporn
#welding
3d

» LOG IN to write comment.

weldporn Starting off the new week just right with some #weldporn by a highly talented fabricator/welder that goes by the name of @shaunscustomalloy 3d

» LOG IN to write comment.

weldporn happy Monday!! GET SHIT DONE
#weldporn
#leadingclassworkers
@jevans___
3d

» LOG IN to write comment.

weldporn Showing my purge set up at home. Twin flow meters, 6mm push in air fittings and top secret purge bungs.
#weldporn
#TPFORMYBUNGHOLE
4d

» LOG IN to write comment.

weldporn Such a shame that @bentleygarner welds will be machined off this massive drill bit!! You can see by the shape of the other one in pic just how much filler he has put into it!
#weldporn
#welding
#justdabit
4d

» LOG IN to write comment.

weldporn What you're looking at is a Lamborghini AVENTADOR exhaust built by none other than Louie AKA @the_fabricator from BBI autosports.
Amazing fabrication/welding skills, the quad tips were handmade from sheetmetal and listen to it scream
#weldporn
#welding
#want
4d

» LOG IN to write comment.

weldporn @wood_da_welder made a custom handle for his stinger looks like it works well@looking at his welding.
#weldporn
#welding
4d

» LOG IN to write comment.