twisted_turbo You're the Yin to my Yang, baby. @topgun.gray
Thanks for helping me bring her back to life!
2d
  •   foreverfadedd__ She finally runnin? @twisted_turbo 2d
  •   cg6_gray It's no problem baby. I'd do anything for you. I love you. 2d
  •   lsvdb1 Did the wago pee? 0.o 2d
  •   cg6_gray @lsvdb1 LOL it looks like it did doesn't it, I surprised her by washing it while she was out with her family. 23h

» LOG IN to write comment.

twisted_turbo I just want my damn car fixed! Spent a day and a half replacing the head with an A6 head from @slo88crx . Found out this morning that 3 head studs on the exhaust side, need to be helicoiled. I really hope that works. If not... 2w
  •   tonyjackson I always hated working on those cars. Good luck! 2w
  •   cg6_gray We got it, don't worry we will get it fixed K. I promise. 2w
  •   lsvdb1 I wouldn't do a helicoil on a head stud.. Get a different block.. Helicoil isn't going to hold up to the torque requirement.. Specially not that many on one motor.. 2w
  •   og_wagon What about a timesert?? I've have good results with those in the past. 2w
  •   jazzymiata Come ride with me in my 3! My Miata is getting pretty bad and I quitting on driving it. Can't afford the fix 2w
  •   emmaleeautomatic Your Instagram looks kind of like mine. Cars every where and very little pics of you... 2w
  •   twisted_turbo @emmaleeautomatic and the occasional baby picture that shows we really don't give a shit! 2w

» LOG IN to write comment.

twisted_turbo We were one, for that mile. It was just her and I... No one else.
I need that back.
3w

» LOG IN to write comment.

twisted_turbo The parts corner in my room, is starting to pile up! I need a weekend just to install the head, and the speaker pods. Plus I need to sell the seats and other parts. So much to do... And no time to do it!
The freshly machined A6 head for the wagon came in yesterday, thanks to @slo88crx.
3w

» LOG IN to write comment.

twisted_turbo I spent all last weekend prancing about the #GlamisSandDunes with @topgun.gray. I need to either buy a quad that's better fit for jumping, or set mine up so it's better accustomed to impacts from 4-7 ft high jumps.
Came home and whacked my left ankle on the bolt that attached the swing arm axle to the frame. It had to have been sticking out at least a good six inches or so. That would have been a disaster if we had stayed for another day and not have noticed it. Not to mention my shocks have about had it, including the rebuilt one from two summers ago.
Oh the price we pay for a little air time.. Lol!
Gray, not bad for your first weekend out! One step at a time, babe. Maybe I'll show you the chief jump near camp next time. 10 weeks until we hit the dunes out at St. Anthony's, Idaho! That's where the real jumps are.
1mon

» LOG IN to write comment.

twisted_turbo Looks like she's gonna be sitting there for a few weeks until I can find a solution to the blown head gasket and potentially warped head.
It sucks, not having time for my most prized possession anymore.
It's #miatatime now
1mon

» LOG IN to write comment.

twisted_turbo Selfie feat. my oversized glasses and the #DoosanCNCLathe.
400 spline adapters comin' right up!
1mon

» LOG IN to write comment.

twisted_turbo Face off this, drill that, change the offset, cut there, push that, insert this, change the offset, change it again, lube here, adjust that, change the offset four or five more times, run it again, measure here, de-burr that, remove this, and repeat.
I love my job. #Hurco #TM6 #CNC
2mon
  •   luvyouinmouth You just got a follow on this one. #haas all day tho... and that em2O.o 2mon
  •   twisted_turbo @luvyouinmouth haha there are zero Haas machines here. Sadly! Mostly Hurco, and a few others. Hasport has 'em though. 2mon
  •   luvyouinmouth Hasport makes pretty stuff tho. 2mon
  •   luvyouinmouth We scooped two vf2 from pwjdm. Someone had the inside hookup with the firearms mfg. I managed to scoop some work from hybrid before they gpt machines 2mon
  •   lsvdb1 I miss the smell of that coolant.. Lolz good times 2mon
  •   ke_arms We have all haas 1mon
  •   twisted_turbo @ke_arms ooooh! Maybe I'll stop by soon and say hi! 1mon

» LOG IN to write comment.

twisted_turbo You're my pain in the ass. 2mon

» LOG IN to write comment.

twisted_turbo Man, what a day. This definitely had to be the highlight though. I was able to cruise with RC from @rcsgarage, in @misterdarkness's NSX to the Scottsdale Pavilions show, shortly after RC's first annual car show.
I usually don't sing my praises about people online, but this guy deserves it. He's going to go places, and he is a prime example of the quote, "started from the bottom, now we here." Keep doing what you're doing. Daily grind isn't easy, but you make it look easy. Thanks for all you do for the car community!
Here's to a successful car show.
2mon

» LOG IN to write comment.

twisted_turbo I can't go a week without touching her. Did a full-on maintenance day, including a good cleaning. I love my girl! ...but I still miss the RSX. 3mon

» LOG IN to write comment.

twisted_turbo I know it's not Thursday, but I'm doing it anyway.
Throwback to 2012, before my girl got re-wrapped.
I miss her
3mon

» LOG IN to write comment.

twisted_turbo Shenanigans occurred today. I got dirty in a heartbeat. #feelsgood. 3mon

» LOG IN to write comment.

twisted_turbo So I got to drive a badass sand rail at the dunes this weekend.
It's an LS6 block with LS1 heads, 383ci stroker (usually 350ci) and its built to make 525 HP, but is not making that at the moment. Brand new engine; still working out the kinks.
Spent the whole weekend doing rides after rides, hauling ass and jumping all over the place. Not to mention the ride alongs in excessively powerful sand rails. It's good to be back in my own bed though!
4mon

» LOG IN to write comment.

Normal Keturah Corbin
twisted_turbo One hell of a night. Rescued a fellow #z0m813 and packed seven people into the wagon, enough so that she was tucking tires! Shenanigans followed soon after.
Headed for the dunes tomorrow!
4mon

» LOG IN to write comment.

twisted_turbo Looks like I'm doing track day, alone. If that's what it takes to keep racing, by going alone, I'm more than willing to do so. 4mon

» LOG IN to write comment.

twisted_turbo "When one door closes, two doors open."
Right now, it feels like doors are closing left and right.
I just want my job, and the RSX back.
4mon

» LOG IN to write comment.

twisted_turbo Closed out 2014 pretty hard on NYE! Finally got around to posting this.
2014 had its rough spots, but they were never permanent. I always remain focused on the highlights, and that started out with my first year of Landspeed racing, with a top speed of 149. Then my graduation from clown school, aka high school, and then the start of my first year at MCC. Stressful, but I managed to complete my first semester with a 3.5 GPA. Shortly after, I walked into Squeeg's Kustoms on a whim, and straight up asked for a job, which I got. Soon thereafter, @gunplay.gray came along and has made my life much more enjoyable, seeing as the RSX is over 400 miles away! #ProjectWagon is off to a strong start, and already looks like her original self, minus the receiver. I made new friends, removed those who were tainting my outlook on life, and although I don't talk to some very much anymore, I still love them to death. I definitely had to overcome some challenges and put up with a lot of health issues that came my way, including the one that put me in the ER at 3 in the morning yesterday. Can't seem to catch a break!
Thanks to all of you for the continued love and support . I'm so glad to see so many people express their appreciation and interest in what I do. Stay tuned, as I share the many adventures and moments that come my way! Love you all. Happy New Year!
(I could only tag so many people, sorry! You know who you are.)
4mon

» LOG IN to write comment.

twisted_turbo #MCM. what a sexy librarian... @gunplay.gray 4mon

» LOG IN to write comment.

twisted_turbo finally, no more faded plastics. 4mon

» LOG IN to write comment.