oorracing Fastest way to boil water? KGo! @mockspeepee #SwayAway #LucerneValley 1d

» LOG IN to write comment.

oorracing Speechless. So sad. Haven't been back here in a few years. #Fallen8 #California200 #RIP 2d

» LOG IN to write comment.

Normal Kevin Casey
oorracing Pinched my finger. 3d

» LOG IN to write comment.

  •   iisrandy I accumulated one of them over the years. Mines a pain to open and close lol 4d
  •   klenkyy I remember you gave me one and I used it as a key chain and six flags made me get rid of it cause it as a deadly weapon 4d
  •   darkside_limo Sick macro... 4d
  •   oorracing @klenkyy Whattttt 😐 I only have one left myself. I had probably 8 lol 4d

» LOG IN to write comment.

oorracing I probably post way too many pictures and videos of @orange_truck_chris F-150, but he allows me to fiddle with his 3.0" #Swayaway coilovers and try new things with them. It makes me happy to see the smiles on people's faces right after their truck drives through a whoop section they never thought they could drive through. I don't claim to be an expert by any means, but I try my best and I enjoy what I do. I'm still not 100% satisfied with this truck, but each trip out is a step closer to where I want it. #DialedShockPrep #PRESSPLAY #Clifford #Prerunner 5d

» LOG IN to write comment.

  •   oorracing @jmaxwell279 Where at and how much 6d
  •   jmaxwell279 @oorracing sd I'll find out price for you tomorrow 6d
  •   oorracing @jmaxwell279 Not too far. Let me know!!! Thanks 6d
  •   jmaxwell279 @oorracing will do no worries 6d
  •   iisrandy Stupid question but my neighbor has stock ones of like a 98 expedition... he said finding wheels for it was a pain (if it were the same as a f1 why would it be so hard).. But if you know if they will work for you let me know and I'll talk to him and see what the deal is with them. 6d
  •   tonysato @oorracing we got a set a work. 6d
  •   oorracing @iisrandy They are the wrong bolt pattern :( 6d
  •   oorracing @tonysato Any chance I could borrow them? Or buy them for cheap? I only need them to hook the back of an F150 to a lift gate on a flatbed tow truck. They won't get driven on or anything lol 6d

» LOG IN to write comment.

oorracing Saturday ritual @mckenziesoffroad Always here for shock parts... And to drool on the SI beam kit. #Mckenzies #SIMotorsports #FoxShocks #DialedShockPrep 1w

» LOG IN to write comment.

oorracing Per the words of @ryan.cook_ and @chris_mazzulla, Mr.PeePee goes #Industrial. If your F150 or Raptor can't do this, then today is your lucky day! @mockspeepee is selling the front AND rear bolt on suspension with shocks included. Shock tuning is already done and dialed in! Just gotta bolt it on and go race the #Baja1000. Don't be a sissy, huck your truck. Hit @mockspeepee up for more info. #ForSale #OffRoadSwapmeet #OffRoadclassifieds #Prerungnar #Camburg #Swayaway #King #DialedShockPrep #FordRaptor #F150 #Raptor #RaptorKiller 1w

» LOG IN to write comment.

oorracing Four Bms 2.5" hubs. Never used, mocked up, or even assembled. 12 bolt front snouts and weld in rears. Only the rears have purple caps and rotor adapters. $3,100 obo @offroad_swapmeet @offroad_classifieds @selloffroad #ForSale #BlitzkriegMotorsports #Hubs #Fancy #BuyMe #OffRoadSwapmeet #OffRoadclassifieds #SellOffroad 1w

» LOG IN to write comment.

oorracing Sitting in traffic on PCH so I can go sit in more traffic on the 405. Now remind me again why people want to live here?!? #ListenUp #HereWeGo #NewportBeach #DidMeDirty #Traffic #LimpBizkit #ChocolateStarfish 2w

» LOG IN to write comment.

oorracing Finished up the rear shocks for the #BlackWidow owned by @kalilster3. Fresh seals, oil, nitrogen, and ball park valving based on what I learned from tuning @_kazu_86's truck. #DialedShockPrep #PrerunnerRanger #Camburg #DezertRangers #FoxShocks #Rebuild #Revalve #TuningIsKey 2w

» LOG IN to write comment.

Normal Kevin Casey

» LOG IN to write comment.

Normal Kevin Casey
oorracing Stoked on my new (to me) #Bridgeport Vise. I've been in need of a vise with higher clamping forces than my normal vise I currently use for shock servicing. #CraigslistScore #BridgePortVise #WiltonVise #NeedToPaintIt #Stoked 2w
  •   ja_gonzalezz The app insta size allows you to use the full photo without cropping 2w
  •   358mustang Nice I have an old Kurt vise in my garage that comes in handy once in a while. I can't see your Wilton not being able to clamp hard enough though ?! 4d
  •   oorracing @358mustang Since I mainly service shocks, there are times when I need to change a lower rod end or top cap, and I needed a vice that is capable of clamping parts extremely tight in aluminum jaws so the part won't just spin as I try to loosen something. I have used our giant MILL vise in the past, and I was using a 3' cheater bar on the 1' handle trying to get it tight enough haha. I would snap a my Wilton in half if I tried to do that. Different vice's for different jobs. 4d
  •   358mustang Yeah I had a hard time changing my lower rod ends on my shocks so I know what you mean. I didn't make a tool but I just clamped the whole shaft in the aluminum jaws. Honestly I don't think it is the clamp force but the fact that machinist vises are much more square , and the jaws are flat and parallel to each other so it will have way more grip force than a standard garage vise. Did you make a stand for that thing ? 4d
  •   oorracing @358mustang Lower rod ends are cake with this thing now.. Haha top caps are still a major pain though. That makes sense.. They way I look at it, Anvil style vise's are meant for beating, grinding, and welding the part you're working on. Mill style vises are simply meant to clamp things as solid as possible so they don't move around while you machine on the part. Nope.. I have plans to make a shock work station, I just need the time to build it 4d
  •   358mustang Nice I haven't messed with shocks, just swapping to some longer lower eyes. That's right , the machinist vises are solid for sure. Cool sounds like fun. Sounds like you've done it enough to know what you want and how to build the work station. 4d

» LOG IN to write comment.

» LOG IN to write comment.

oorracing "Remember, it’s always better to be at the bottom of the ladder you want to climb than the top of the one you don’t… even if it means beginning anew. Just because some things didn’t work out as you had expected, or didn’t happen as fast as you thought they would, is no excuse to give up on yourself. Time passes one way or the other. Do what you need to do so that, at the very least, you can look back someday and say, “I gave life my best shot.” #Truth #WordsOfWisdom 3w

» LOG IN to write comment.

oorracing If you have never had a BBQ-prepared Hot Pocket, than you need to re-evaluate your life. I thought I had things figured out with my fancy microwave oven that cooked these delicious capsules of cheese and pepperoni awesomeness in just a few minutes. Boy was I wrong.. Open fire cooking for these bad boys only from now on! The dancing flames cooks these suckers into a golden brown, crispy, fluffy, pocket of awe-inspiring nourishment. No who wants to BBQ??? #IfYouDontKnowNowYouKnow #HotPocket #CampfireCooking #DoneRight #OnlyBurnedMyHandTwice #FattyFattyNoFriends #IEatAllTheFood #NomNomNom 3w

» LOG IN to write comment.

» LOG IN to write comment.